S10 Rechargeable Nail Lamp

PACKING LIST

1.Main body

2.Power Adapter

3.Instruction

 

PRODUCT INSTRUCTION

Designed for professional nail experts,Could perfect cure UV gel/Builder/LED gel

HOW TO USE

1.The machine is connected to the charger and connected to the I power supply.The display shows a flashing, indicating that it is charging, and the three grids do not flash, indicating that the machine is full.Pull out the charger in time.Note: No default charging display is shown when the power master switch is off.

2.Long press the switch/power button for 3 seconds, the machine starts or shuts down, continuously short press the switch/power button, the display shows the power.

3.After starting the machine, if user don't use the timing setting button, Infrared sensor starts working whend putting hands into the machine, the default infrared sensor is 99 seconds.

4.When pressing 30s, 60s, 99s time button, the machine will work automatically.(99 seconds short press painless mode,d power enhances gradually over time, to resolve all painproblem caused by curing gels)

5.When the timing is working, the display will show the corresponding time.the

30S, 60S are countdown, 99S and infrared sensor are clockwise.

6.Press the 30S button for 3 seconds, the display will be reversed.

7.When the digital display flashes, it means that thei machine is short ofelectricity

and should be charged in time.

TECHNICAL INSTRUCTION

1.30PCS UV LED beads

2.Rated input:100-240V 50/60Hz 1A

3. Wave length:365+405nm