• 지원 인터콤: YES
  • 플러그 유형: EU 플러그
  • 특징: Bluetooth Intercom,FM Radio
  • 제품 중량: 0.35kg
  • 품목 높이: 4.5inch
  • 품목 너비: 11.5inch
  • 제품 길이: 16.5inch
  • 외부 테스트 증명서: ce
  • 모델명: Tcom sc
  • 적합한 헬멧 유형: 헬멧,MODULAR,모토크로스,오픈 페이스,굵은 활자,플립업 헬멧,보편
  • 특수 기능: FM(화장품),음성 제어,범용 페어링 기능,방수,소음 감소
  • 전원 공급 모드: 내장 배터리
  • 연결 모드: bluetooth
  • 최대 스피커 수: 3
  • 최대 인터콤 거리: 500-1000 메터
  • 원산지: 중국
  • 품목 유형: 헬멧 헤드셋


옵션정보

[(29)1 set tcom sc]


[(193)2 set tcom sc]







Two Riders Long Distance Intercom
800M duplex intercom
LCD Screen Stable Quality Classical and Tiny Size Super Long Standby Time Hard & Soft Cable Microphone Into one Earphone
The USB charging port has been upgrated from 8pin to 5pin
It is more convenient to charge



Turning off the unit:
Press the small black power button for 5 seconds or until you hear 2 “Di” tones and the lights extinguish.
To pair to your Bluetooth enabled mobile phone:
When the unit is off, press and hold the small black power button at the end of the unit. Hold the button until you see a RED AND BLUE light flashing. It normally takes around 5-8 seconds from off. Do not let go when you see the blue light. You will also hear a “DuDu” tone when the unit enters pairing mode. On your phone, search and attempt to pair to the device, when the device is flashing red and blue. If requested the pairing code will be 0000 and you should set the phone to auto pair to the device.
To Pair 2 devices in intercom mode:
When both devices are turned off, press and hold the small black power button on both devices until both units flash red/blue repeatedly. You need to hold the button for more than 6 seconds and dont let go when you see the blue light.
Short press the black power button on ONE of the two devices and this device will search and auto-pair to the other in intercom mode. A live call will be initiated.
If this fails retry it ensuring both red/blue light sequences are initiated simultaneously and are close together. Also ensure any other Bluetooth devices are turned off.
When paired, you do not need to go into pairing mode again. In future you only need to go into standby mode (blue light flashing) on both units and press the button on one of the devices.
To Pair 3 devices in intercom mode:
Follow the above procedure for each combination of the three units. (A-B, B-C, A-C).
Ensure the third unit is switched off when pairing the other two devices.
Only 1 connection can be live at a time. When successfully paired the connections can be switched by ending any live call and returning to standby.
From Standby press the power/intercom button 1 time for one of the pairings to be called, or 2 times for the other pairing to be called.
The pairing for 1 or 2 presses will depend on the sequence in which you paired the 3 helmets, but once paired the relevant pairings will maintain the number.
i.e. A will press the power/intercom button 1 time to call B and 2 times to call C. B will press the button 1 time to call C and 2 times to call A. C will press the button 1 time to call A and 2 times to call C.

To Reset the pairing memory:
If you have problems pairing, then it is best to reset the pairing memory
Turn on the relevant unit into standby mode. Press the power/intercom button for 3-5 seconds till a “dudu” can be heard. This should be before the unit switches off.
Let go of the button when the tone is heard.
Turn off the unit and restart, the memory will be erased.
To Use FM Function:
1. Headset idle status, press MFB twice to turn FM on.
2. When FM is on, turn the MFB clockwise or counterclockwise and it will seek
out the next or previous FM station and begin playing.
3. When FM is on, press MFB twice to turn FM off.
Packing List:
1/2 x Bluetooth Devices
1/2 x 2 in 1 Microphone&Ear Speaker
4/8 x Headphone Velcro
1/2 x Sets Velcro Clip
1/2 x Hook Clip
1/2 x Screw Driver
1/2 x USB Charge Cable
1 x User Manual