12.1 Inch buckle embedded industrial touch monitor, Resistive touch, Optional VGA/DVI/HDMI interface

If you need other interfaces and other questions, please contact us. Thank you.

Optional 1: VGA+DC+Touch USB
Optional 2: DVI+VGA+DC+Touch USB
Optional 3: HDMI+VGA+DC +Touch USB

Detailed size£º

Size:12.1 inch
Resolution:1280*800 ppi
Dimensions: mm

Support power on and run 24 hours a day, 365 days

The whole machine has the ability to run 24 hours a day, and is competent in all walks of life. It can be set to power on through the BIOS. It is suitable for an unstable environment that needs to be continuously powered on.

Industrial-grade sheet metal heat dissipation design

High standard technology, metal cold-rolled plate body design, multi-row cooling hole design, bring a better industrial use experience, fast and silent heat dissipation.

The metal body is more resistant to high and low temperatures

Through the controllable high temperature test, the test product adapts to the temperature between -20 ¡É ~ 60 ¡É, and can run stably even in harsh environments.

Detailed Description

About the material: Using new industrial technology, the cold-rolled sheet metal shell enhances the product's water resistance, gloss, hardness, corrosion resistance and drop resistance.
The stylish arc makes the overall metal texture better. Whether for commercial or industrial use, this would be an enviable piece of craftsmanship.

Installation method

1. Embedded installation
¨çBefore installation, the cabinet needs to be opened, and the opening size should be slightly larger than the opening size specified by the product.
¨èPlace the product into the recessed installation hole reserved on the installation panel.
¨éThere are two square holes on both sides of the device. When installing, use one end of the clip to fasten the square hole, and the screw head on the clip is against the cabinet.
Then tighten the screws, the other three prescription holes are installed in the same way, and the embedded installation can be completed.

2. Wall-mounted installation

¨çFix the wall mount bracket A on the wall with expansion screws.
¨èThe wall bracket B is installed on the back of the all-in-one machine with screws.
¨é Insert the bracket on the back of the all-in-one machine into the wall bracket to complete the installation.

About usage:

This product is widely used in industrial production workshop/engineering machinery/NC equipment/medical equipment/video surveillance/factory automation equipment/self-service terminal/vehicle advertising machine and other scenes or fields.