POE Tester

What does it do?

-Test PoE cameras, VOIP phones, and WiFi installations without interrupting data flow

-Quickly detect and identify PoE type

-Measure power consumption from DC power supplies

-Activate any port on an AF/AT PoE switch

PoE Tester GEN-2 FEATURES

Ergonomic Body Design: A new curved body design that’s 25% smaller than the original PoE Tester makes the GEN2 easier to hold and use.

High-quality LCD Display: The new scrolling LCD displays more information at once and can be read in full daylight.

Simplified Operation: Thanks to automatic mode and polarity detection, the new GEN2 requires only one RJ45 input.

802.3bt Support: 4-pair testing capability makes the GEN2 ready for the new IEEE 802.3bt PoE standard.

Increased Testing Range: Measures DC power supply voltages from 3.5 to 56 volts and current up to 280 watts at 56 volts.

Battery Free operation

1. The Tester requires just 200 mW for operation, taking power from the PoE source.

4 mA at 48v, 8 mA at 24v

Specifications

Data Rate: 10/100/1000

DC Power Input: 2.1mm DC Barrel

Dimensions: 6.5x6x2 cm

Display Range (DC Input): 3.5 to 57 volts, 0 to 5 Amps

Display Range (POE Input): 12 to 57 volts, 0 to 1500 mA

Display Type: LCD

Operating Humidity: 5% to 90 %

Operating Temperature Range: -10° to 60°C

PoE Method: Passive (simulted 802.3af)

PoE Standard: 802.3af/at

PoE Standards Supported: Passive, 802.3af, 802.3at, 802.3bt

DC Adapter Cable: 2.1mm x 5.5mm DC (Male to Male)