Feature:

- Working voltage: DC9V-36V,
- Measuring range: 0M-160M,
- Measurement accuracy: 1M
- Working environment temperature: -20 ° C - -50 ° C,
- Working environment humidity: 45% - 75% RH
- Measuring range: speed 0-160km/h
- Mileage: 0-999999.9km
- Overspeed alarm: driving speed ≥ set value
- Overspeed alarm factory value: 80km / h
- When overspeeding, the upper right corner alarm displays a prompt, no sound prompt
- Magnetic pole pairs: factory value is "8"
- Speed ratio: the factory value is 1:624
- Measurement accuracy: ±0.1%

Installation and use:

The black wire is connected to the positive pole of the power supply (+), the black and white wire is connected to the negative pole of the power supply (-),

and the odometer senses three wires: the red wire is connected to the + on the sensor, the black wire is connected to the - on the sensor, and the yellow wire is connected to the G.X.S on the sensor.

The operation is as follows:

- First, start the car.
- Second, short press for 1 second, the mileage shows ODO and TIPA rotation, select ODO.
- Third, press and hold for 10 seconds to 15 seconds to display the mobile phone number.
- Fourth, when the vehicle starts and exercises to 60 yards, press 1 second to display 000000 to enter the setting function. Press 2 seconds, the setting is completed.

Package:

1 x Car LCD 2 in 1 Gauge ( no sensor )