Feature

●Mechanical endstop kits for RepRap 3D printers or CNC machines. Supported by RepRap Electronics, RAMPS 1.4 and other common RepRap boards
●Using 22AWG wire, the internal copper wire is very thick, can withstand voltage of 2A and 300V. Insulation layer over a wide temperature range up to 80 degrees The general connection of thin copper wire is not match
●Convenient plug, not easy to pull out, plug on the other end and use one directly, for ease of use
●Integrated plug design, easy to install. Environmentally friendly, strong and long lasting material
●Connection: Red line connects to VCC(lamp +), black line connects GND (lamp -), green line connects to signal (lamps)


Description

Product Specifications:
-Wire Type: 22AWG
- Working Voltage: 300V
- Working current: 2A
- Temperature resistance: 80 degree Celsius
- Red line connects to VCC (Ramp+)
- Black line connects to GND (Ramp - )
- Green line connects to signal (lamps)
- Cable Length: Approx 70cm/27.56"
-Supports use of RAMPS 1.4 plates
- Size: 40mm x 15mm
- Tips: Normally you need to set the system at least 3 machine switches

Package Contents:
6x Endstop End Stop Switch Limit Switch

Product Description:
Machine Endstop kits are applied for RepRap 3D printers and CNC machines.
Machines Endstop are endorsed by RepRap electronics, RAMPS 1.4 and other popular RepRap boards.
High quality open and close elements, professional custom high quality connection.
Adopts 24 AWG conductor, thick inner copper wire, and can withstand 300 V voltage 2A current.
The insulated layer has a wide temperature range and can reach 176°F (80°C). Normally it is incomparably compared to dane-wire copper wire.
It is difficult to break and easy to plug and unplug. One plug is integrated and can be used by inserting directly into the product.
The system is positioned at least 3 machine switches under normal circumstances.

[Precautions]
1. Please be aware that you must have expertise in order to use this product.
2. We only sell our products, we can not provide technical support for our products.
3. The color and size of the actual item may differ slightly from the published images due to lighting and display settings.